33
Using the flash
Your camcorder has three flash modes for taking still images:
■ Auto flash (intensive)
■ Auto flash (extensive)
■ Flash off
Auto flash (intensive). The flash fires automatically according to the
ambient lighting conditions. Use this mode for general photography.
Auto flash (extensive). The flash fires every time. Use for this mode for
distance photography.
Flash off. Flash is turned off.
To set the flash mode:
1 Turn on your camcorder.
2 Open the LCD display on your camcorder 90 degrees.
3 Press the OK button repeatedly until the flash mode that you want
appears on the LCD display.
09449.book Page 33 Tuesday, September 16, 2003 5:04 PM
To Next Page
Loading...
General