38
Displaying thumbnail images
Thumbnail mode lets you to view nine small images on the LCD display
simultaneously so you can quickly find a specific still image.
To use thumbnail mode:
1 Turn on your camcorder.
2 Open the LCD display on your camcorder 90 degrees.
3 Press the Playback/Pause button to view recorded still images.
4 Select the still image you want to view using the or button.
5 Press the OK button multiple times to select thumbnail mode. Up to
nine small images appear on the LCD display.
6 Use the arrow buttons to select the image you want to displayed at
regular size.
7 Press the OK button to display the selected still image at normal size.
09449.book Page 38 Tuesday, September 16, 2003 5:04 PM
To Next Page
Loading...
General