118
www.gateway.com
12 Reset the power on your cable or DSL modem.
13 Restart all of your computers on the network.
14 To connect to the access point router, see “Connecting to an access
point wireless network” on page 118.
Connecting to an access point wireless network
After you have set up your wireless access point router, you need to set
up the network connection on your computers.
To connect to an access point wireless network:
1 Before connecting to an access point router, you must turn on
wireless networking. For more information, see “System key
combinations” on page 32.
2 Click Start, then click Control Panel. The Control Panel window opens.
If your Control Panel is in Category View, click
Network and Internet
Connections
. The Network and Internet Connections window opens.
3 Click/Double-click Network Connections. The Network Connections
window opens.
To Next Page
Loading...
