Gavita CT 1930e User Manual

1
1 Introduction
Thank you for purchasing the Gavita
®
CT 1930e LED. This manual describes mounting, installation and how to use the product.
Mounting and installation of the LED fixture may only be executed by certified service personnel. Please read and understand
this manual completely before using the product. Only use the product as specified in this manual.
1.1 Used Symbols
Warning! A warning indicates severe damage to the user and/or product may occur when a procedure is not carried
out as described.
Caution! A caution sign indicates problems may occur if a procedure is not carried out as described. It may also serve
as a reminder to the user.
Note: A note gives additional information, e.g. for a procedure.
This symbol is an internationally recognized symbol used to designate recyclable materials.
This symbol is a certification mark employed on electronic products manufactured or sold in the United States.
The Federal Communications Commission regulates electromagnetic interference in the United States.
ETL is an independent third party product testing company which performs a variety of testing, including recognized
safety standards.
This symbol on material, accessories or packaging indicates that this product may not be discarded as household
waste. By properly disposing the equipment, you will be helping to prevent possible risks to the environment and public
health, which might otherwise be caused by improper handling of the discarded equipment. Recycling of materials
contributes to the conservation of natural resources. Therefore, please do not dispose of old electronics and electrical
appliances via household waste.
This symbol indicates the minimum distance (B) between the LED fixture (A) and the lit surface.
2 Product description
The Gavita
®
CT 1930e LED is an electronic horticultural LED fixture. The Gavita CT 1930e LED is intended to be used in
greenhouses or in climate rooms. In this manual, the Gavita CT 1930e LED will be referred to as: “the LED fixture”.
Gavita
®
CT 1930e LED 120-277 V

Gavita CT 1930e Specifications

General

Brand	Gavita
Model	CT 1930e
Category	Lighting Equipment
Language	English

Summary

Introduction

Used Symbols

Explains symbols used in the manual for warnings, cautions, notes, and recycling.

Product Description

Describes the Gavita CT 1930e LED as an electronic horticultural LED fixture for greenhouses.

Product Information and Specifications

General Product Information

Details product name, manufacturer, part number, UPC, and plug type.

Technical Specifications

Lists input voltage, power, current, heat load, frequency, ambient temp, rating, weight, dimensions, certifications.

Technical Specifications - Components

Details controllers, power cords, and interconnect cables with Gavita part numbers.

Environment

Specifies intended use in greenhouses/climate rooms and temperature limits.

Compliance

Outlines FCC compliance and adherence to safety standards like UL and CSA.

Safety Recommendations and Warnings

Controls, Connections, and Indications

Installation

Installing the LED Fixture

Step-by-step guide for mounting, securing, and connecting the LED fixture.

Preparation for Use with a Controller

Instructions for using the fixture with or without a Gavita controller or dummy plug.

Daisy Chain Connection

Detailed steps for creating a daisy chain connection using RJ45 ports and cable glands.

Preparation for Use with 3rd Party Systems

Guidance on integrating the fixture with analog 0-10V building communication systems.

Connecting to the Mains

Instructions for safely connecting the LED fixture to the power mains using Wieland connectors.

Inspection, Maintenance, and Repair

Disconnecting the Wieland RST16i5 Plug

Procedure for safely disconnecting the power cable from the LED fixture.

Storage and Disposal

Limited Warranty