Gavita Pro Series User Manual

Pro line
Gavita HortiStar 1000 DE EU
www.gavita-holland.com
Gavita Holland bv Oosteinderweg 127
1432 AH Aalsmeer The Netherlands
T +31(0)297-380 450 F +31(0)297-380 451
The refl ector is one of the key elements of a
successful fi xture. You can have the best ballast
and the best lamp, but without a good refl ector you
waste a lot of light, every day you use it. Keeping your
refl ectors in optimal condition is a must for good
results.
The Gavita HortiStar 1000 DE comes with a
replaceable high effi ciency Miro aluminum refl ector.
As an alternative, inlay refl ectors are available. It
is specifi cally designed for 1000 Watt double ended
lamps. The lamp cord terminal is shielded by a metal
housing. Installation is very easy with the two eye
bolts.
Technical specifi cations
Dimensions : 20.1” / 511 mm (length) x 9.6” / 244 mm (width) x 7.6” / 193 mm (height)
Lamp holder : Vossloh Schwabe k12 x 30s
Refl ector : Gavita HortiStar HR 96 1000 Miro aluminium refl ector
Cable gland : M20
Lamp cord : Optional (4m with IEC or Wieland plug)
One of the best 1000 Watt HPS lamps in the market is the double ended Philips 1000W 400V EL lamp.
Specifi cally designed for high frequency electronic ballasts it has a connection at each side of the lamp
(hence double ended), removing the need for a frame support wire inside of the lamp. The absence of
a frame wire eliminates any shadows in the beam. Instead of vacuum it is gas fi lled which allows for a
smaller arc tube, improving the optical control. The Gavita HortiStar 1000 DE refl ector is specifi cally
designed for this type of lamp.
Gavita HortiStar 1000 DE refl ector
PHILIPS GreenPower Plus 1000W EL Double Ended lamp
Horticultural design
HortiStar 1000 HR 96 DE refl ector
Refl ector effi ciency 96 %
Easily replaceable refl ector
Shielded cord terminal
For double ended 1000W lamps
Changes reserved - Version 1131EU

Gavita Pro Series Specifications

General

Brand	Gavita
Model	Pro Series
Category	Lighting Equipment
Language	English

Summary

Gavita HortiStar 1000 DE EU Product Overview

Key Features

Horticultural design, high reflector efficiency, replaceable reflector, shielded cord terminal, for double ended lamps.

Product Description

Details the double-ended Philips 1000W 400V EL lamp and its benefits for optical control.

Technical Specifications

Dimensions, lamp holder, reflector type, cable gland, and optional lamp cord details.

Installation and Usage Guidance

Pre-Installation Instructions

Read manual carefully before installation for safe operation and to avoid warranty issues.

Scope of Use

For 1000W double-ended HPS lamps in climate rooms; suitable for damp locations.

Suitable Lamps

For 750-1000W MH/HPS high frequency lamps rated for open fixture use.

Wiring and Connections

Wiring the Reflector

Instructions for connecting wires to terminals, ensuring proper grounding and connections.

Lamp Cord Installation Steps

Guide on feeding cord through gland, connecting terminals, and tightening gland for strain relief.

Lamp and Reflector Handling

Installing the Reflector and Lamp

Covers reflector coverage area, recommended distance to crop, and correct lamp insertion.

Lamp Replacement Procedure

Steps for safely replacing the lamp, including cooling down and disconnecting power.

Removing a Lamp

Instructions on how to safely detach the lamp from the holders.

Maintenance and Troubleshooting

Reflector Replacement

Guidance on when and how to replace the high-efficiency reflector annually.

General Maintenance

Cleaning the bracket, checking electrical connections, and avoiding contaminants.

Troubleshooting Tips

Advice for when the lamp does not fire up, checking connections and components.

Safety Warnings and Warranty

Warning Symbols Explained

Explains symbols for self-shielding lamps, reflector temperature, and minimum distance.

Warranty Information

Details the warranty period for mechanical/electronic components and HPS lamps.