Need help?Do you have a question about the GB Instruments GMT-19A and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Display Type | LCD |
| Display Digits | 3.5 |
| Maximum Display | 1999 |
| Battery Type | 9V |
| Low Battery Indicator | Yes |
| AC Voltage | 200V |
| DC Current | 200µA/2mA/20mA/200mA/10A |
| Resistance | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ |
| Dimensions | 5.1” x 2.8” x 1.2” (130 x 70 x 32mm) |
Important safety precautions and warnings for using the multimeter.
Steps for zeroing the needle indicator and setting up test leads.
Procedure to verify the internal battery status before testing.
How to test automotive batteries using the multimeter.
Testing alternators and generators with the multimeter.
Method for testing household batteries voltage.
Procedure for measuring DC current up to 10 Amps.
Testing AC voltage in wall receptacles for proper grounding.
Measuring AC voltage at appliance receptacles.
Testing AC voltage on circuit breaker panels.
Testing continuity and resistance of extension cords.
Checking appliance cords for continuity and resistance.
Testing fuses for continuity and low resistance.
Testing electrical switches for continuity.
Checking heating elements for continuity and resistance.
Testing thermostat contacts for continuity.
To Next Page
