GBC CombBind C110E User Manual

Quickstep Guide 1-2-3 (fig.10)
The QuickStep Guide label on the machine is a quick reference
guide to how to bind in three quick and simple steps.
1
Understand the comb size required by measuring on the
document size area 1, select the appropriate ProComb.
2
Load the ProComb with the dot to the left and open until
you see the coloured arrow.
3
Punch and load your document on to the spine until your
document is complete. Close the spine.
ZipComb spine (fig.9)
The ZipComb spine allows you to create an easily editable
document with comb punch orientation.
1
Place the adaptor on to the metal teeth.
2
Place the spine into the zip holder as shown in fig.4.
3
Load and punch paper as per 'Binding' section 6-8.
4
Load punched paper on to spine.
5
Remove document and spine, close the ZipComb using the
zipper included in the ZipComb boxes.
6
Complete by flipping the back cover around the spine, for a
professional finish where the spine is hidden.
7
G
Empty chip drawer (fig.8)
• Your CombBind C110 E has a chip drawer located on the
right side of the machine.
• When it is full of punched paper chips, a red light
(fig.5)
will illuminate.
• Gently pull the drawer to open it and remove from machine,
empty and re-insert the drawer back in machine until it
snaps in place.

GBC CombBind C110E Specifications

General

Format	A4
Control type	Buttons
Product color	Black
LED indicators	Stand-by
Punch capacity	15 sheets
Binding capacity	330 sheets
Country of origin	China
Method of control	Electric
Maximum paper width	38 mm
Anti-blocking system	Yes
Punch holes quantity	21

Weight and Dimensions

Depth	385 mm
Width	350 mm
Height	220 mm
Package depth	301 mm
Package width	490 mm
Package height	435 mm