To Next PageTo Next PageWhat to do if the GBC Binding Machine leaves lubricant stains on paper?
If the GBC Binding Machine's punching mechanism is leaving lubricant stains on your paper, clean it by punching through scrap paper until the paper comes out clean. This protective film is applied to the mechanism and needs to be removed before you begin binding.
General| Format | A4/A3/A5 |
|---|---|
| Media weight | 80 g/m² |
| Product type | Comb binding machine |
| Product color | Black |
| Punch capacity | 25 sheets |
| Binding capacity | 450 sheets |
| Country of origin | Portugal |
| Method of control | Electric |
| Maximum paper width | - mm |
| Punch holes quantity | 21 |
| Binding comb diameter (max) | 51 mm |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Package depth | 235 mm |
|---|---|
| Package width | 545 mm |
| Package height | 490 mm |
| Package weight | 14600 g |
Identifies the document separator, clippings tray, comb opening teeth, paper centering dial, and punch button.
Covers general safety advice for operating the binding machine and handling potential hazards.
Highlights safety precautions specific to the electric C450E and C366E models.
Guides on preparing the machine for first use, including removing protective film.
Instructions on selecting the correct comb size and preparing paper for punching.
Step-by-step guide for punching paper and assembling the document with the comb.
Provides additional advice for optimal document binding, including cover placement and editing.
Details the use of a security slot for anti-theft devices like Kensington Micro-savers.
Guidance on emptying the clippings tray and indicators for full trays (visual/LED).
Addresses common problems like thermal overload and duty cycle limitations.
