Need help?Do you have a question about the GBC DocuBind P100 and is the answer not in the manual?
General| Binding Capacity | 100 sheets |
|---|---|
| Punching Capacity | 10 Sheets |
| Binding Width | Up to 1 inch |
| Binding Style | Comb |
| Document Size | Letter |
| Hole Pattern | 19 holes |
Push the handle (A) onto the binding rod for initial setup.
Secure the handle firmly using a screwdriver (B).
Set edge guide (C) to match paper size: 11" (letter), 11" (oversized cover), or A4.
Align sheets and insert edge into punch throat (D).
Ensure covers are flush against the edge guide and punch throat.
Pull handle down to punch up to 12 sheets; use one clear cover at a time.
Place document under sizer (E) and select comb (F) based on guide.
Use GBC brand covers and color-coordinated combs for best results.
Place comb binding element behind comb holder (G).
Push handle back to sufficiently open the binding element.
Thread document onto open binding element fingers, front cover down.
Pull the handle towards you to close the binding element.
Your presentation is complete; remove the book by lifting upward.
Empty the chip tray (H) located under the machine after repeated use.
Contact GBC at One GBC Plaza, Northbrook, IL 60062-9656 for service.
