16
Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery
before use.
CAUTION: To reduce the risk of fire or
personal injury, use only the Thomson Inc.
approved Nickel-Cadmium (Ni-Cd) battery
model 5-2459 or Nickel Metal Hydride
battery model 5-2522 that is compatible
with this unit.
1. Locate battery and battery door which are packaged
together inside a plastic bag and are separate from
the handset.
2. Locate the battery compartment on the back of the
handset.
3. Plug the battery pack cord into the jack inside the
compartment.
To Next Page
Loading...
