21
REDIAL
1. Pick up the handset, or press SPEAKERPHONE or HEADSET.
2. The line is automatically selected. (For headset, press the line you want.)
3. Wait for a dial tone.
4. Press REDIAL.
NOTE: The redial function will not operate if the number to be redialed
contains more than 30 digits. If the number is longer than that, you will hear
an error tone.
REVIEWING THE REDIAL BUFFER
1. Press REVIEW.
2. Press REDIAL. The last number stored in the redial buffer shows on
the display.
AUTOMATIC BUSY REDIAL
If the phone number dialed is busy, your telephone can automatically
redial the number up to 10 times. It will use the line currently selected to
make the calls.
WHEN YOU RECEIVE A BUSY SIGNAL
1. Hang up the phone.
2. Press BUSY REDIAL. The busy redial indicator will flash between redial
attempts and the speaker will beep when a connection is made. If you
do not pick up the handset or speakerphone within 60 seconds, the
telephone will disconnect.
To Next Page
Loading...
