GE 2-9451 User Manual

9
WALL MOUNT INSTALLATION
1. Turn the handset hook 180º until it clicks
into place.
2. Connect one end of the telephone line
cord to the jack on the back of the
phone labeled LINE 1,2. For full 4-line
use, connect a line cord to the LINE 3,4
jack. Thread the LINE 1,2 line cord
through the hole in the wall mount
bracket. Insert the wall mount bracket
onto the bottom of the base unit by
lining up the tabs, making sure to route
the AC power cord and the LINE 3,4
line cord into the slot at the bottom of
the bracket. Snap it into place. Connect
the LINE 1, and LINE 3,4 line cords to
their respective wall jacks.
3. Hold the phone against the wall plate
(not included) so that the posts on the
wall plate slide into the keyholes on the
wall mount bracket. Slide the phone
down firmly so that it locks securely
into place.
2
STORE IN
1
5
9
13
PAGE
1
3

GE 2-9451 Specifications

General

Brand	GE
Model	2-9451
Category	Telephone
Language	English