GE 2-9451 - Page 39

39
SETTING AUTO INTERCOM
The intercom function requires picking up the handset or pressing
INTERCOM when you receive an intercom call. For “hands-free” opera-
tion, the phone can be set to automatically answer in the speakerphone
mode when being intercommed.
TIP: You can use this feature for room monitoring.
1. Press PROGRAM.
2. Press LOWER.
3. Press INTERCOM.
4. Press the digit for the desired default mode. Press 1 for automatic
intercom operation during intercom, or 0 for manual intercom
operation.
5. Press # to confirm.
CHANGING A STATION ADDRESS
1. Press PROGRAM.
2. Press INTERCOM. The display reads Addr- .
3. Press the new 2-digit station address (01-16) or memory location button
you want.
4. Press # to confirm. The indicator will blink red while the phone checks
the new station location. If it is already assigned, you will hear an error
tone. You must then select another one. The INTERCOM indicator will
turn off.