GE 2-9451 - Page 41

41
Problem Solution
Incoming voice too low • Check setting of volume control.
or none at all.
Indicator and tone • This is normal as power is fluctuating as phone dials.
feedback flutter when
dialing in pulse mode
Memory dialing • Did you program the memory location keys correctly?
doesn’t work • Did you follow proper dialing sequence?
• Make sure the pulse/tone mode is programmed correctly.
Battery LOW indicator • The 9V battery needs replacing or is not installed.
blinks or is solid
Intercom does not • Make sure lines 1 and 2 are connected properly and
function correctly common to all phones on the system.
• Make sure all station addresses involved have been
assigned.
Transfer does not • Make sure lines 1 and 2 are connected properly and
function correctly common to all phones on the system.
• Check the connections for lines 3 and 4.
• Make sure the extension number has been programmed for
lines 3 and 4.
Display reads Addr- • The station address needs to be re-assigned due to a
duplicate station address in the system. See “Changing the
Station Address”.