16
Trim kits and decorator panels.
19.1 mm or Raised Panel
A raised panel design screwed or glued to a 6.3 mm thick backing, or a 19.1 mm routed board can be used.
The raised portion of the panel must be fabricated to permit clearances of at least 5.1 cm from the handle
side for fingertip clearance.
Panels thicker than 6.3 mm, up to 19.1 mm max., will require that the outer 7.9 mm of panel perimeter be
no thicker than 6.3 mm.
Weight limitations for custom panels:
Fresh Food 4.5 kg max. for each door
Freezer Door 8 kg max.
5.1 cm
Clearance
Handle Side
Appearance
Panel
Refrigerator
Door
6.3 mm Thick
Backing
19.1 mm
Panels thicker than 6.3 mm
6.3 mm max
19.1 mm
7.9 mm
Dimensions for Custom Wood Panels
Right Fresh Food Door
Freezer Door
Top, right and
bottom
42.9 cm
7.9 mm
minimum at
6.3 mm thickness
Raised portion
of panel
50.8 mm
minimum at
6.3 mm thickness
Handle side
66.3 cm
50.8 mm minimum
at 6.3 mm thickness
Handle side
Left, right and
bottom sides
7.9 mm minimum
at 6.3 mm thickness
91.2 cm
Raised
portion
of panel
98.9 cm
Left Fresh Food Door
Top, left and
bottom
42.9 cm
7.9 mm minimum
at 6.3 mm thickness
Raised portion
of panel
50.8 mm
minimum at
6.3 mm thickness
Handle side
98.9 cm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
3.2 mm
6.3 mm
6.3 mm
6.3 mm
6.3 mm
6.3 mm
3.2 mm
6.3 mm
To Next Page
Loading...
Need help?
General
