About the temperature controls. GEAppliances.com
Not all features are on all models. Your controls may be similar to the following:
f
!
I
Touch-LEDDispenser Control
NOTE:Therefrigeratorisshippedwith
protectivefilm coveringthetemperature
controls.Ifthisfilm wasnotremoved
duringinstallation,removeitnow.
AdJust Temperature
<AEl_Or%mr_ _armer_ _ _orrner_ T_rbOoCoo_
® ....
o_,......... .o. ,.o................o.
Thetemperaturecontrolsarepresetinthefactoryat37°F(3°C)
fortherefrigeratorcompartmentandO°F(-18°C)forthefreezer
compartment.Allow24hoursfor thetemperatureto stabilize
tothepresetrecommendedsettings.
Refrigeratortemperaturescanbeadjustedbetween34°Fand46°F
(1°Cto8°C),andthefreezertemperaturescanbeadjustedbetween
-6°Fand+8°F(-21°Cto -13°C).
To change the Refrigerator temperature: Tactile-LED
Dispenser Control
The temperature controlscan displayboth the SETtemperature as
wellas the actual temperature inthe refrigerator and freezer.The
actual temperature may varyslightlyfromthe SETtemperature
based on usage and operating environment.
On some models, setting both controls to the warmest setting
untilthe displayflashes(off)willstop coolingin both the freezer
and refrigeratorcompartments.
On other models, setting eithercontrol to the warmest setting
untilthe displayflashes (off)willstop the coolingto the freezer
and refrigerator.
NOTE:Turningthe refrigerator offviathe controls on the touch
panel does not shut offelectricalpowerto the refrigerator.
NOTE:Therefrigeratorisshippedwith protectivefilm coveringthe
temperaturecontrols,tfthisfilm wasnot removedduringinstallation,
removeit now.
® • • ® 0 ®
ilte ore ush abe ick I Loc
Ho14Ssecondsto Reset Ho14sseconds
@
Tactile LEDDispenser Control.
Turning the cooling system off: Tactile-LED Dispenser
Control
On some models, setting both controls to the warmest setting
untilthe displayflashes(off) willstop cooling inboth the freezer
and refrigeratorcompartments.
On other models, setting eithercontrol to the warmest setting
untilthe displayflashes (off)willstop the coolingto the freezer
and refrigerator.
NOTE:Turningtherefrigeratoroff viathecontrolsonthetouch
paneldoesnot shutoff electricalpowerto the refrigerator.
Touch-LEDDispenser Control:
Pressand release the FREEZERTEMP/FRIDGETEMP pad.
Pressto set freezer temperature to 5.The display will
show OFF.To turn the unit back on, press the FREEZER
TENPt_RIDGE TENP pad. Press to set the freezer and
refrigerator temperatures to the preset points of 0°F (-
18°0 V
for the freezer and 37% (3°0 for the refrigerator.
When the unit is turned back on, it will take up to 24 hours
to stabilize.
Touch-LED Dispenser Control:
Tochange the temperature, pressand release the FREEZER
TEMP/FRIDGETEMP pad. The SET light willcome on and
the display willshow the set,_emRgrature. To change the
temperature, tap either the or " pad until the desired
temperature is displayed.
Once the desired temperature has been set, the temperature
display willreturn to the actual refrigerator and freezer
temperatures after 5 seconds. Several adjustments may be
required. Each time you adjust the controls, allow 24 hours
for the refrigerator to reach the temperature you have set.
ThetemperaturecontrolscandisplayboththeSETtemperature
aswellas theactualtemperatureintherefrigeratorandfreezer.
TheactualtemperaturemayvaryslightlyfromtheSETtemperature
basedonusageandoperatingenvironment.
Performance Air Flow S stem
ThePerformance Air-FlowSystem isdesigned
to maximize temperature control in the refrigerator and
freezer compartments. Thisunique specialfeature consists
of the AirTower along the back wall of the refrigerator and
the AirTunnel on the bottom portion of the freezer rear wall.
Placingfood infront of the louvers on these components will
not affect performance. Although the AirTower and the Air
Tunnelcan be removed, doing sowill affect temperature
performance. (Forremoval instructions, on-line,contact
us at ge.com or call 800.GE.CARES.InCanada,contact us
atgeappliances.caor call 1.800.561.3344.)
To Next Page
Loading...
Need help?
General
