29
Changing a Stored Number
Use the same procedure to change a stored number as you do to store a number–
you’re just replacing the phone number with a different one.
Dialing a Stored Number
1. Pick up the handset or press the SPEAKERPHONE button.
2. Press the
DIAL. button The screen displays MEMORY DIAL=?.
3. Press the memory location number (0-9). The number dials automatically.
Alternatively, you can preview the number before dialing (when the handset is
on-hook).
Press the DIAL button and then select the desired memory location (0-9). The number
will be shown on the display. Press the DIAL button again to make the connection in
speakerphone mode.
Dialing a Quick Dial Number
1. Pick up the handset or press the SPEAKERPHONE button.
2. Press
A, B, or C. The number dials automatically.
IMPORTANT: If you make test calls to emergency numbers, remain
on the line and explain the reason for the call. Also, make these
calls in off-peak hours, such as early morning or late evening.
Alternatively, you can preview the number before dialing (when the handset is
on-hook).
Press a Quick Dial button (A, B or C), the number will be shown on the display. Press
the DIAL button again to make the connection in speakerphone mode.
To Next Page
Loading...
