25
Installation Instructions
3
REINSTALL FREEZER DRAWER FRONT
A. Pull the rail assemblies to the maximum
extension.
B. Locate the slots on the inside of each slide.
C. Insert the hooks on the ends of the drawer
assembly extensions into the slots near the
back of the slides.
D. Lower the front end of the freezer drawer
assembly so the side tabs fit into the front
slots on the rail assemblies.
Hook
Slot
Side Tab
Front Slot
E. Replace the safety screws in both sides of
the slide assemblies.
F. Replace lower and upper baskets (see
About freezer drawer, page 12).
To Next Page
Loading...
Need help?
General
