GE 24991 User Manual

9
 CodeIdentication
TheCodeIdenticationFeatureallowsyouto
identify the 4 digit library code stored under your
devicekey.Forexample,ifyouwanttondout
what 4 digit code is stored under your TV device
key, follow the six steps below:
1. Press and hold the SETUP button until
the red indicator stays on. Release the
SETUP button.
2. Press and release the desired mode
button (TV, DVD, etc.). The red
indicator blinks, then stays lit.
3. Press and release the
SETUP button.
The red indicator blinks once and
remains lit.
4. Tondtherstdigitfor
the code stored under the
mode key pressed in step
2, press each numeric
key from 0-9 in turn. The
number that causes the
indicator light to blink is
therstdigitinyourcode.
5. Tondtheseconddigit,repeatstep4.
6. Repeatstep4againtondthethirdandfourth
digits. This time the red indicator turns off and
stays off.

GE 24991 Specifications

General

Brand	GE
Model	24991
Category	Universal Remote
Language	English