7
Programming Your Remote
programming is required for that
device. If the device does not turn off,
or is not fully functional repeat steps
3-6 and use the next code found in
the code list. Continue this process
until a code for your device is found.
7. Repeat this process for each device
(for example TV, DVD, CBL) in your
home entertainment system you wish
to control.
Programming Notes
• If your device does not respond to the remote after
trying all codes listed or your brand is not listed in
the code list, use the Auto Code Search method to
program your remote.
• Sometimes the first code that “works” with your
device may operate only a few functions of your
device. There may be another code in the code list
that controls more functions. Try other codes from
the code list for more functionality.
• You can use any device button to control other
devices in your home entertainment system. For
example, you can use the CBL device button to
control an audio receiver or a DVD, VCR, satellite,
etc.
• For combination devices, you may have to enter a
code for each device. For example, for a VCR/DVD
device, you may have to enter a code for the DVD
under the DVD button and enter a code for the
VCR using a different device button on the remote.
• Write down the code found to operate your device
for future reference.
To Next Page
Loading...
Need help?
General
