GE 30385EE1 User Manual

Phonebook Phonebook
32 33
Delete all phonebook entries
1. Press when in idle mode.
2. Press / or use the scroll wheel to select the desired phonebook, then press the
Select softkey.
3. Press the Options softkey.
4. Press / or use the scroll wheel to select Delete All, then press the Select
softkey.
5. Press the Yes softkey to conrm.
Phonebook capacity
This feature allows you to check the remaining capacity of the phonebook.
1. Press when in idle mode.
2. Press / or use the scroll wheel to select the desired phonebook, then press the
Select softkey.
3. Press / or use the scroll wheel to select entry, then press the Options softkey.
4. Press / or use the scroll wheel to select PB Capacity, then press the Select
softkey. The screen then displays X/Y, where X indicates the number of entries
stored while Y indicates the capacity of the selected phonebook.
For example, 241/1500 means that there are 241 entries in a phonebook, which
has a maximum capacity of 1500 entries.
Direct memory
You can program 20 phone numbers into the memory location buttons 1-10 and
shift 1-10 in the telephone base for quick dialing.
To program a memory location:
1. Press the Menu softkey when the telephone base is in idle mode.
2. Press / or use the scroll wheel to select Direct Memory, then press the Select
softkey.
3. Press buttons 1-10 for locations 1-10, or press button shift followed by 1-10 for
locations 11-20.
4. Enter the number (max. 24 digits). If you need a pause between digits, press and
hold the until a P appears in the display. This will insert a 3-second pause in
the dialing sequence.
5. Press the Save softkey to conrm.
To dial from a memory location:
Press the desired memory location button on the telephone base, the number will be
dialed automatically using the speakerphone.
-OR-
1. Lift the corded handset, or press or or .
2. Press the desired memory location button on the telephone base.
To edit/delete a memory location number:
1. Press the Menu softkey when the telephone base is in idle mode.
2. Press / or use the scroll wheel to select Direct Memory, then press the Select
softkey.
3. Press the desired memory location button (1-10 for locations 1-10, or shift
following by 1-10 for locations 11-20).
4. To edit the number, press to delete the existing numbers. Then use the dial
pad keys to enter the new number (max. 24 digits). If you need a pause between
digits, press and hold the until a P appears in the display. This will insert a
3-second pause in the dialing sequence.
-OR-
To delete the number, press and hold until all numbers erased on the
screen.
5. Press the Save softkey to conrm.
Character table
Use the dial pad and the chart below to enter a name (up to 15 characters). Each
press of a particular key displays the character in the following order:
Dial pad
key
Character by number of key presses
1 2 3 4 5 6 7 8
[1] space 1 # ‘ , - . &
[2] Aa Bb Cc 2
[3] Dd Ee Ff 3
[4] Gg Hh Ii 4
[5] Jj Kk Ll 5
[6] Mm Nn Oo 6
[7] Pp Qq Rr S 7
[8] Tt Uu Vv 8
[9] Ww Xx Yy Zz 9
[0] 0
NOTE: Press # to alternate between upper and lower case. Press * for special characters, *, ?, !, /, (, ), @.

GE 30385EE1 Specifications

General

Brand	GE
Model	30385EE1
Category	Telephone
Language	English