GE Advantium SCB2000 Installation Instructions

6
Installation
Built-In Speedcook Ovens
• Open the door and remove packing material
with ceramic tray.
• Locate owners kit in carton. Remove and
save.
• Locate box with metal trays in carton.
Remove and save.
• Locate parts package containing 5 mounting
screws. (4 required, 1 extra)
1
Remove
Packaging
and Parts
Step
2
Route
Conduit
Through
Cutout
Step
3
Secure
Oven
to Cabinet
Step
With oven in front of the cabinet opening:
• Insert conduit into cabinet opening.
• Lift the oven into the opening while
continuing to feed the conduit in the
direction of the installed junction box.
Be sure the conduit does not get pinched
between the back of the oven and the
cabinet wall.
• Slide oven into the cabinet opening.
• Drill 3/32" pilot holes into the cabinet frame
through the 4 mounting holes in the oven
front frame.
• Secure oven to cabinet with screws supplied.
WARNING
Securely fasten oven to
cabinet using the screws provided. Failure
to do so could cause the oven to move or
tip during use and result in personal injury.
2 people are required
to lift the oven into the opening. Grasp the
bottom at front and rear. Discard styrofoam
base. DO NOT USE HANDLE TO LIFT
THE OVEN. DAMAGE WILL OCCUR!
CAUTION
IMPORTANT: To protect the bottom trim, do
not remove the styrofoam shipping base until
the oven is slipped into the opening.
Styrofoam
Shipping Base
Attachment
Screws
Secure Oven To Cabinet
With Screws Provided

GE Advantium SCB2000 Specifications

General

Brand	GE
Model	Advantium SCB2000
Category	Oven
Language	English