EasyManua.ls Logo

GE AF-600 FP Series - User Manual

GE AF-600 FP Series
7 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GE Consumer & Industrial
Electrical Distribution
AF-600 FP & AF-650 GP
TM
OPCGPIO General Purpose I/O
Option Module
The instructions do not purport to cover all details or variations in equipment nor to provide for every possible
contingency to be met in connection with installation, operation or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the
matter should be referred to the GE company.
AF-600 FP and AF-650 GP are trademarks of the General Electric Company.
GE Consumer & Industrial
41 Woodford Avenue
Plainville, CT 06062
www.geelectrical.com/drives
130R0140 MI33K102
*MI33K102*
DET-632

Other manuals for GE AF-600 FP Series

Preview: Design And Installation Guide
Design And Installation Guide121 pages
Preview: Instruction
Instruction6 pages

Questions and Answers

  • J
    Jesse WilliamsAug 12, 2025
    What to do if the GE DC Drives display is dark?
    • J
      Jason LeeAug 12, 2025
      If the GE DC Drives display is dark, start by checking the input power source. Also, inspect the fuses for any breaks or if the circuit breaker has tripped and follow the recommendations provided. Ensure that the terminals are wired properly to avoid a shortcut on control voltage. If none of these steps work, the display (keypad) might be defective and needs replacement, or there may be an internal voltage supply fault, requiring you to contact the supplier.
  • T
    Thomas BrownAug 20, 2025
    How to fix a GE DC Drives display with no function?
    • R
      Rhonda RuizAug 20, 2025
      To fix a GE DC Drives display with no function, check the input power source first. Then, check for any blown fuses or tripped circuit breakers and follow the recommendations provided. Also, verify that there is power to the keypad; if not, replace the faulty keypad or connection cable. Ensure correct wiring of the terminals to prevent control voltage shortcuts. If the issue persists, adjust the contrast by pressing [Status] + [?]/[?]. If still not working, the display may be defective, or there could be an internal voltage supply fault, requiring you to contact the supplier.
  • D
    Dr. Adam SmithAug 27, 2025
    Why is my GE DC Drives display flickering?
    • J
      Jason GoodAug 27, 2025
      An intermittent display on your GE DC Drives could be due to an overloaded power supply caused by improper control wiring or a fault within the frequency converter. If the display stays lit, check the control wiring for shorts or incorrect connections. If the display continues to cut out, follow the procedure for a dark display.
  • G
    grosssamanthaSep 3, 2025
    How to adjust contrast on GE DC Drives if the display is dark?
    • J
      John CurrySep 3, 2025
      If the GE DC Drives display is dark due to a wrong contrast setting, press [Status] + [?]/[?] to adjust the contrast.

GE AF-600 FP Series Specifications

General IconGeneral
BrandGE
ModelAF-600 FP Series
CategoryI/O Systems
LanguageEnglish

Related product manuals