EasyManua.ls Logo

GE b30 - Page 281

GE b30
526 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
UR FAMILY – COMMUNICATIONS GUIDE 3-43
3
Table 3-28: B90 time overcurrent data objects
3.5.2.10 B90 undervoltage (B_Uv)
This element is instantiated in the following products: B90.
Table 3-29: B90 undervoltage data objects
3.5.2.11 Breaker failure (BkrFa)
This element is instantiated in the following products: B30, C60, C70, D60, F60, G60, L30, L60, L90, M60, T60.
Table 3-30: Breaker failure data objects
LNName: B_TocPTOC# LDevice inst: Prot UR element: Time Overcurrent element #
data obj. data attribute Type FC UR Name Description R/W/C
Str ACD TOC# PKP operand, which indicates that
Op operates when delay expires
R
general BOOLEAN ST TOC# PKP R
dirGeneral ENUMERATED ST 0, the code for unknown R
Op ACT TOC# OP operands (including individual
three phases)
R
general BOOLEAN ST TOC# OP R
Dpo SPS TOC# DPO operand R
stVal BOOLEAN ST TOC# DPO R
DpoPhs1 SPS TOC# DPO operand R
stVal BOOLEAN ST TOC# DPO R
BlkRefγ ORG TOC# BLOCK setting for setting group γ R
setSrcRef ObjectReference SP TOC# BLOCK for group γ Reference to the data attribute to input R/C
setSrcCB ObjectReference SP Source GoCB of input if via GOOSE R/C
LNName: B_UvPTUV# LDevice inst: Prot UR element: B90 Undervoltage element # function
data obj. data attribute Type FC UR Name Description R/W/C
Str ACD UNDERVOLTAGE # PKP operands R
general BOOLEAN ST UNDERVOLTAGE # PKP R
dirGeneral ENUMERATED ST 0, the code for unknown. It is unknown as
the element is non-directional
R
Op ACT UNDERVOLTAGE # OP operand R
general BOOLEAN ST UNDERVOLTAGE # OP R
Dpo SPS UNDERVOLTAGE # DPO operand, which is
the inverse of UNDERVOLTAGE PKP
R
stVal BOOLEAN ST UNDERVOLTAGE # DPO R
BlkRefγ ORG UNDERVOLTAGE # BLK setting for setting
group γ.
R
setSrcRef ObjectReference SP UNDERVOLTAGE # BLK for group
γ.
reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: BkrFaRBRF# LDevice inst: Prot UR element: Breaker Control element #
data obj. data attribute Type FC UR Name Description R/W/C
InRefγ02 ORG BF# 3-POLE INITIATE setting for setting
group γ
R
setSrcRef ObjectReference SP 3-POLE INITIATE input reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
BlkRefγ ORG BF# BLOCK setting for setting group γ R
setSrcRef ObjectReference SP BF# BLOCK. reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRefγ03 ORG BF# BKR POS1 φA/3P setting for setting
group γ
R
setSrcRef ObjectReference SP BF# BKR POS1 φA/3P. reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRefγ04 ORG BF# BKR POS2 φA/3P setting for setting
group γ
R

Table of Contents

Other manuals for GE b30

Related product manuals