EasyManua.ls Logo

GE b30 - 6. ACTUAL VALUES; 6.1 OVERVIEW

GE b30
526 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
UR FAMILY – COMMUNICATIONS GUIDE 3-119
3
3.5.3.7 Broken conductor detection (BknCnd)
This element is instantiated in the following products: D30, D60, F35, F60, L30, L60, L90.
Table 3-143: Broken conductor detection data objects
3.5.3.8 Broken rotor bar (BkrRot)
This element is instantiated in the following products: M60.
Table 3-144: Broken rotor bar data objects
VISIBLE
STRING255
SP If reference is external to this
IED, mapped to the source’s
GOOSE control block, else empty
string
R/C
cdcNs VISIBLE
STRING255
EX Name of the GE Multilin
namespace at the time of this
firmware release
R
cdcName VISIBLE
STRING255
EX GEORG R
LNName: BknCndPIOC# LDevice inst: Ctrl UR element: Broken Conductor element #
data obj. data attribute Type FC UR Name Description R/W/C
Mod INC This logical node’s mode R/Ctrl
stVal ENUMERATED ST 1 (on) R
ctlModel CtlModels CF 0 (status only) R
Health INS This logical node’s health R
stVal ENUMERATED ST LPHD1.PhyHealth.stVal R
Str ACD BROKEN CONDUCT # PKP operand R
general BOOLEAN ST BROKEN CONDUCT # PKP R
dirGeneral ENUMERATED ST 0 R
Op ACT BROKEN CONDUCT # OP operand R
general BOOLEAN ST BROKEN CONDUCT # OP R
BlkRef1 ORG BROKEN CONDCT # BLOCK setting R
GEORG R
setSrcRef ObjectReference SP BROKEN CONDCT # BLOCK reference to the data attribute to input R/C
VISIBLE
STRING255
SP Reference to the ultimate source
of value selected by setting
BROKEN CONDCT # BLOCK
R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
VISIBLE
STRING255
SP If reference is external to this
IED, mapped to the source’s
GOOSE control block, else empty
string
R/C
cdcNs VISIBLE
STRING255
EX Name of the GE Multilin
namespace at the time of this
firmware release
R
cdcName VISIBLE
STRING255
EX GEORG R
LNName: BknRotSVBR1 LDevice inst: Ctrl UR element: Broken Rotor Bar element
data obj. data attribute Type FC UR Name Description R/W/C
Mod INC This logical node’s mode R/Ctrl
stVal ENUMERATED ST 1 (on) R
ctlModel CtlModels CF 0 (status only) R
Health INS This logical node’s health R
stVal ENUMERATED ST LPHD1.PhyHealth.stVal R
Alm SPS ROTOR ALARM # PKP operand R
stVal BOOLEAN ST ROTOR ALARM # PKP R
Trip SPS ROTOR ALARM # OP operand R
LNName: BkrRtkPIOC# LDevice inst: Ctrl UR element: Breaker Control element #
data obj. data attribute Type FC UR Name Description R/W/C

Table of Contents

Other manuals for GE b30

Related product manuals