EasyManua.ls Logo

GE b30 - Page 372

GE b30
526 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-134 UR FAMILY – COMMUNICATIONS GUIDE
MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) CHAPTER 3: IEC 61850 COMMUNICATION
3
3.5.3.20 Reduced voltage starting (LoVStr)
This element is instantiated in the following products: M60.
Table 3-158: Reduced voltage starting data objects
3.5.3.21 Restart delay (StrDl)
This element is instantiated in the following products: M60.
Table 3-159: Restart delay data objects
setSrcRef ObjectReference SP PID # TRACKING SIGNAL setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
BlkRef1 ORG PID # BLK setting. R
setSrcRef ObjectReference SP PID # BLK reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: LoVStrGAPC1 LDevice inst: Ctrl UR element: REDUCED VOLTAGE STARTING element
data obj. data attribute Type FC UR Name Description R/W/C
Mod INC This logical node’s mode R/Ctrl
stVal ENUMERATED ST 1 (on) R
ctlModel CtlModels CF 0 (status only) R
Health INS This logical node’s health R
stVal ENUMERATED ST LPHD1.PhyHealth.stVal R
Str ACD Mandatory data object which in this case
is fixed at false
R
general BOOLEAN ST R
dirGeneral ENUMERATED ST 0 R
Op ACT REDUCED VOLT OP operand R
general BOOLEAN ST REDUCED VOLT OP R
Ctrl SPS REDUCED VOLT CTRL operand R
stVal BOOLEAN ST REDUCED VOLT CTRL operand R
BlkRef1 ORG REDUCED VOLT BLOCK setting. R
GEORG R
setSrcRef ObjectReference SP REDUCED VOL BLOCK. reference to the data attribute to input R/C
VISIBLE
STRING255
SP Reference to the ultimate source
of value selected by setting
REDUCED VOL BLOCK.
R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
VISIBLE
STRING255
SP If reference is external to this
IED, mapped to the source’s
GOOSE control block, else empty
string
R/C
cdcNs VISIBLE
STRING255
EX Name of the GE Multilin
namespace at the time of this
firmware release
R
cdcName VISIBLE
STRING255
EX GEORG R
LNName: StrDlPMRI1 LDevice inst: Ctrl UR element: RESTART DELAY element
data obj. data attribute Type FC UR Name Description R/W/C
Mod INC This logical node’s mode R/Ctrl
stVal ENUMERATED ST 1 (on) R
ctlModel CtlModels CF 0 (status only) R
Health INS This logical node’s health R
stVal ENUMERATED ST LPHD1.PhyHealth.stVal R
StrInh SPS RESTART TIME OP operand R
stVal BOOLEAN ST RESTART TIME OP R
LNName: PIDRegFPID# LDevice inst: Ctrl UR element: PID Regulator element #
data obj. data attribute Type FC UR Name Description R/W/C

Table of Contents

Other manuals for GE b30

Related product manuals