GE b30 - Page 401

CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
UR FAMILY – COMMUNICATIONS GUIDE 3-163
3
Table 3-183: Field contact output data objects
3.5.4.10 Field latching outputs (FLOut)
This element is instantiated in all UR products (B30, B90, C30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60,
N60, T35, T60).
Table 3-184: Field latching output data objects
3.5.4.11 Field RTDs (FRTDs)
This element is instantiated in all UR products (B30, B90, C30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60,
N60, T35, T60).
Table 3-185: Field RTD data objects
LNName: FCOutGGIO1 LDevice inst: System UR element: Field Contact Outputs
data obj. data attribute Type FC UR Name Description R/W/C
Ind1Θ SPS FCO φ DOn operand value R
stVal BOOLEAN ST FCO φ DOn R
Ind2Θ SPS Only instantiated for SSR contact outputs,
i.e., OUT1 to OUT4
R
stVal BOOLEAN ST FCO φ IOn R
Ind3Θ SPS Only instantiated for SSR contact outputs,
i.e., OUT1 to OUT4
R
stVal BOOLEAN ST FCO φ VOn R
InRef1Θ ORG FCO φ Operate setting. R
setSrcRef ObjectReference SP Operate setting of FCO φ reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef2Θ ORG FCO φ Seal-In setting. R
setSrcRef ObjectReference SP Seal-In setting of FCO φ reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: FLOutGGIO1 LDevice inst: System UR element: Field Latching Outputs
data obj. data attribute Type FC UR Name Description R/W/C
Ind1Θ SPS FLO Θ Opened operand value R
stVal BOOLEAN ST FLO Θ Opened R
Ind2Θ SPS FLO Θ Closed operand value R
stVal BOOLEAN ST FLO Θ Closed R
Ind3Θ SPS FLO Θ OpnDOn operand value R
stVal BOOLEAN ST FLO Θ OpnDOn R
Ind4Θ SPS FLO Θ ClsDOn operand value R
stVal BOOLEAN ST FLO Θ ClsDOn R
InRef1Θ ORG FLO Θ Open setting. R
setSrcRef ObjectReference SP Open setting of FLO Θ reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef2Θ ORG FLO Θ Close setting. R
setSrcRef ObjectReference SP Close setting of FLO Θ reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: FRTDsGGIO1 LDevice inst: System UR element: Field RTDs (Resistance Temperature Detectors)
data obj. data attribute Type FC UR Name Description R/W/C
IndΘ
SPS RTDΘ Trouble On operand value R
stVal BOOLEAN ST RTDΘ Trouble On R
AnInΘ MV RTDΘ Temperature in degree Celsius R
instMag AnalogueValue MX R
instMag.f FLOAT32 RTDΘ Temperature R
mag AnalogueValue MX R