GE b30 - 9.2 ZONING AND DYNAMIC BUS REPLICA

CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
UR FAMILY – COMMUNICATIONS GUIDE 3-167
3
3.5.4.19 Transducer resistance temperature detectors (TRTDs)
This element is instantiated in the following products: G60, M60.
Table 3-193: RTD input data objects
VISIBLE
STRING255
SP Reference to the data object
selected by DCMA OUTPUT φ
SOURCE
R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
VISIBLE
STRING255
SP If reference is external to this
IED, mapped to the source’s
GOOSE control block, else empty
string
R/C
cdcNs VISIBLE
STRING255
EX Name of the GE Multilin
namespace at the time of this
firmware release
R
cdcName VISIBLE
STRING255
EX GEORG R
MaxValΘ ASG Maximum Value in deadband
calculations
R
setMag AnalogueValue SP R
setMag.f FLOAT32 “DCMA OUTPUT φ MAX VALUE” R/C
minVal AnalogueValue CF R
minVal.f FLOAT32 –90.000 R
maxVal AnalogueValue CF R
maxVal.f FLOAT32 90.000 R
stepSize AnalogueValue CF R
stepSize.f FLOAT32 0.001 R
MinValΘ ASG Minimum Value in deadband calculationsR
setMag AnalogueValue SP R
setMag.f FLOAT32 “DCMA OUTPUT φ MIN VALUE” R/C
minVal AnalogueValue CF R
minVal.f FLOAT32 –90.000 R
maxVal AnalogueValue CF R
maxVal.f FLOAT32 90.000 R
stepSize AnalogueValue CF R
stepSize.f FLOAT32 0.001 R
LNName: TRTDsGGIO1 LDevice inst: System UR element: RTDs (Resistance Temperature Detectors)
data obj. data attribute Type FC UR Name Description R/W/C
AnInΘ MV RTD INPUT φ Temperature in degree
Celsius
R
instMag AnalogueValue MX R
instMag.f FLOAT32 RTD INPUT φ Value R
mag AnalogueValue MX R
mag.f FLOAT32 instMag.f deadbanded R
units Unit CF R
units.SIUnit ENUMERATED 23, the code for degree Celsius (°C) R
units.multiplier ENUMERATED 0, the code for a multiplier of 1 R
db INT32U CF TRTDsGGIO1.AnInΘ.db R/W/C
zeroDb INT32U CF 0 R
LNName: TDCOutGGIO1 LDevice inst: System UR element: DCmA outputs
data obj. data attribute Type FC UR Name Description R/W/C