GE b30 - Page 404

3-166 UR FAMILY – COMMUNICATIONS GUIDE
MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) CHAPTER 3: IEC 61850 COMMUNICATION
3
Table 3-191: DCmA input data objects
3.5.4.18 Transducer DCmA outputs (TDCOut)
This element is instantiated in the following products: B30, C30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60,
N60, T35, T60.
Table 3-192: DCmA output data objects
LNName: TDCInGGIO1 LDevice inst: System UR element: DCmA Inputs
data obj. data attribute Type FC UR Name Description R/W/C
Mod INC This logical node’s mode R/Ctrl
stVal ENUMERATED ST 1 (on) R
ctlModel CtlModels CF 0 (status only) R
Health INS This logical node’s health R
stVal ENUMERATED ST LPHD1.PhyHealth.stVal R
AnInΘ MV DCMA INPUT φ Value R
instMag AnalogueValue MX R
instMag.f FLOAT32 DCMA INPUT φ Value R
mag AnalogueValue MX R
mag.f FLOAT32 instMag.f deadbanded R
db INT32U CF TDCInGGIO1.AnInΘ.db R/W/C
zeroDb INT32U CF 0 R
MaxValΘ ASG Maximum Value in deadband
calculations
R
setMag AnalogueValue SP R
setMag.f FLOAT32 “DCMA INPUT φ MAX VALUE” R/C
minVal AnalogueValue CF R
minVal.f FLOAT32 –9999.999 R
maxVal AnalogueValue CF R
maxVal.f FLOAT32 9999.999 R
stepSize AnalogueValue CF R
stepSize.f FLOAT32 0.001 R
MinValΘ ASG Minimum Value in deadband calculationsR
setMag AnalogueValue SP R
setMag.f FLOAT32 “DCMA INPUT φ MIN VALUE” R/C
minVal AnalogueValue CF R
minVal.f FLOAT32 –9999.999 R
maxVal AnalogueValue CF R
maxVal.f FLOAT32 9999.999 R
stepSize AnalogueValue CF R
stepSize.f FLOAT32 0.001 R
LNName: TDCOutGGIO1 LDevice inst: System UR element: DCmA outputs
data obj. data attribute Type FC UR Name Description R/W/C
Mod INC This logical node’s mode R/Ctrl
stVal ENUMERATED ST 1 (on) R
ctlModel CtlModels CF 0 (status only) R
Health INS This logical node’s health R
stVal ENUMERATED ST LPHD1.PhyHealth.stVal R
InRefΘ ORG DCMA OUTPUT φ SOURCE setting. R
GEORG R
setSrcRef ObjectReference SP Reference to the data object
selected by DCMA OUTPUT φ
SOURCE
reference to the data attribute to input R/C