GE b30 - APPENDIX B B.1 MODBUS RTU PROTOCOL; B.1.1 INTRODUCTION; B.1.2 PHYSICAL LAYER; B.1.3 DATA LINK LAYER

CHAPTER 3: IEC 61850 COMMUNICATION MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
UR FAMILY – COMMUNICATIONS GUIDE 3-203
3
stVal BOOLEAN ST LED OTHER R
PhsAInd SPS LED PHASE A operand R
stVal BOOLEAN ST LED PHASE A R
PhsBInd SPS LED PHASE B operand R
stVal BOOLEAN ST LED PHASE B R
PhsCInd SPS LED PHASE C operand R
stVal BOOLEAN ST LED PHASE C R
GndNeutIn
d
SPS LED NEUTRAL/GROUND operand R
stVal BOOLEAN ST LED NEUTRAL/GROUND R
TestPrgInd SPS LED TEST IN PROGRESS operand R
stVal BOOLEAN ST LED TEST IN PROGRESS R
UsrPrgmLE
D$$
SPS instantiated only if the order code
includes optional standard/Enhanced
front panel
R
stVal BOOLEAN ST LED USER $ R
EvtLED$ SPS Instantiated only if the order code
includes graphical front panel
R
stVal BOOLEAN ST “EVENT CAUSE LED $” operand R
InRef1 ORG LED TEST CONTROL setting. R
setSrcRef ObjectReference SP LED TEST CONTROL setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRefψψ ORG instantiated only if the order code
includes optional standard/Enhanced
front panel
R
setSrcRef ObjectReference SP LED ψ OPERAND setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef51 ORG TRIP LED INPUT setting. R
setSrcRef ObjectReference SP TRIP LED INPUT setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef52 ORG ALARM LED INPUT setting. R
setSrcRef ObjectReference SP ALARM LED INPUT setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef53 ORG Instantiated only if the order code
includes graphical front panel
R
setSrcRef ObjectReference SP LED 1 OPERAND setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef54 ORG Instantiated only if the order code
includes graphical front panel
R
setSrcRef ObjectReference SP LED 2 OPERAND setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef55 ORG Instantiated only if the order code
includes graphical front panel
R
setSrcRef ObjectReference SP LED 3 OPERAND setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef56 ORG Instantiated only if the order code
includes graphical front panel
R
setSrcRef ObjectReference SP LED 4 OPERAND setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef57 ORG Instantiated only if the order code
includes graphical front panel
R
setSrcRef ObjectReference SP LED 5 OPERAND setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef58 ORG Instantiated only if the order code
includes graphical front panel
R
setSrcRef ObjectReference SP LED 6 OPERAND setting reference to the data attribute to input R/C
LNName: LEDsIHMI1 LDevice inst: Gen UR element: Front Panel LEDs
data obj. data attribute Type FC UR Name Description R/W/C