GE C1433 - Beep; LCD Brightness

56
Beep
Use this setting to adjust the volume of beep when buttons are
pressed and change the tones for Shutter button, self-timer,
and power-on/power-o.
To change this setting:
1.
Select the Beep setting from the Setup menu as described
previously.
2.
Use the Up/Down navigation buttons to switch between
volume, shutter, key, self-timer, and power elds.
3. Press the Right button, press the Up/Down button to
adjust volume and change tone, and press the
button
to conrm setting.
LCD Brightness
Use this setting to adjust the brightness of your LCD screen.
1. Select the LCD Brightness setting from the Setup menu
as described previously.
2.
Select auto or adjust the brightness level using the
Left/Right button, and press the
button to conrm the
setting.