GE C1433 - Reset Settings; FW Version (Firmware Version)

6060 61
FW Version (Firmware Version)
Use this setting to view the current camera rmware version.
1. Select the FW Version in File and Software menu.
2.
If SD card contains a new version of rmware, please
upgrade accordingly as necessary.
To update to the latest rmware version, you can go to
the following website:www.ge.com/digitalcameras and
look under Support.
Reset Settings
Use this setting to restore the camera to its default settings.
1. Select the Reset setting in File and Software menu.
2. Use the Up/Down navigation buttons to select Yes or No.
Then press the
button to conrm.