GE Caf�© CGP650SETSS Technical Service Guide

– 48 –
6. Remove 4 Phillips-head screws from the top of
the side panel.
5. Remove the Phillips-head screw from the front
panel.
8. Carefully swing the side panel away from the
range. Use a large fl at blade screwdriver to pry
the panel out of the retainer clip while pulling
the top front of the side panel out.
Screwdriver
Retainer Clip
7. On Profi le and GE models, remove the extra 1/4-
in. hex-head screw holding the side panel to the
rear touch panel and ERC bracket.

GE Caf�© CGP650SETSS Specifications

General

Brand	GE
Model	Caf�© CGP650SETSS
Category	Ranges
Language	English