EasyManuals Logo

GE Café series Owner's Manual And Installation Instructions

GE Café series
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
33
Installation Instructions
CONNECTING THE REFRIGERATOR
TO THE HOUSE WATER LINE
A cold water supply is required for automatic ice maker
operation. If there is not a cold water supply, you will
need to provide one. See Installing the Water Line section.
NOTES:
Before making the connection to the refrigerator, be
sure the refrigerator power cord is not plugged into the
wall outlet.
If your refrigerator does not have a water filter, we
recommend installing one if your water supply has
sand or particles that could clog the screen of the
refrigerator’s water valve. Install it in the water line
near the refrigerator. If using GE SmartConnect
Refrigerator Tubing Kit, you will need an additional tube
(WX08X10002) to connect the filter. Do not cut plastic
tube to install filter.
Before connecting the water line to the house, purge
the house line for at least 2 minutes.
If you are using copper tubing, place a compression nut
and ferrule (sleeve) onto the end of the tubing coming
from the house cold water supply.
If you are using the GE SmartConnect
tubing, the nuts
are already assembled to the tubing.
11
A
B
C
1/4 Compression
Nut
Ferrule
(sleeve)
SmartConnect
Tubing
Refrigerator
Connection
INSTALLING THE REFRIGERATOR (cont.)
1/4 Tubing
Tuyau de 1/4 po
Tubería de 1/4
Tubing Clamp
Bride
Abrazadera del tubo
If you are using copper tubing, insert the end of the
tubing into the refrigerator connection, at the back of the
refrigerator, as far as possible. While holding the tubing,
tighten the fitting.
If you are using GE SmartConnect
tubing, insert
the molded end of the tubing into the refrigerator
connection, at the back of the refrigerator, and tighten
the compression nut until it is hand tight. Then tighten
one additional turn with a wrench. Over tightening may
cause leaks.
Fasten the tubing into the clamp provided to hold it in
position. You may need to pry open the clamp.

Table of Contents

Other manuals for GE Café series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE Café series and is the answer not in the manual?

GE Café series Specifications

General IconGeneral
BrandGE
CategoryRefrigerator
CapacityVaries by model
Ice MakerYes
HeightVaries by model
WidthVaries by model
DepthVaries by model
Total CapacityVaries by model
Refrigerator CapacityVaries by model
Freezer CapacityVaries by model
Adjustable ShelvesYes
FinishStainless Steel
Energy Star CertifiedYes
Water DispenserYes
Smart CapabilitiesYes
Counter DepthYes
Door StyleFrench door
Water Dispenser TypeInternal
Door AlarmYes
Color OptionsStainless Steel, Matte White, Matte Black
SeriesCafé
StyleFrench Door
ConfigurationFrench Door

Related product manuals