GE CFE29TS

73
Group Value Displayed Failure Code Definition
Thermistors (1 – 99)
F1
0 0 0 1
FF1 Thermistor Invalid
F2 0 0 0 2
FF2 Thermistor Invalid
F3 0 0 0 3
FZ Cabinet Thermistor Invalid
F4 0 0 0 4
FZ Evaporator Thermistor
F5 0 0 0 5
FP/Deli Pan Thermistor Invalid
F6 0 0 0 6
FF Evaporator Thermistor Invalid
F7 0 0 0 7
Convertible Drawer Thermistor Invalid
F8 0 0 0 8
Ambient Temperature Invalid
F9 0 0 0 9
Ambient Humidity Invalid
F10 0 0 1 0
Ice mold Body Thermistor (MB) Invalid
• When the Software has determined a Thermistor is invalid a F code is logged into memory.
• The thermistor must return to the normal Range and go out of Range to be called again.
• Any time the error code is cleared, the Fault can set again immediately if the thermistor is still invalid.
• The software also will to check to see if the thermistor/sensor should be there based on the model before generating the Failure code.
(IE on a non-Bottom Freezer, the ambient Temp and the Ambient Humidity sensor are not present so the F Code will not be generated
for those sensors.
Thermistor Failure Codes