GE CL 5

CL 5 Issue 01, 04/05 9-5
Manufacturer/Service Addresses Appendix
9.4 Manufacturer/Service
Addresses
The CL 5 is manufactured by:
GE Inspection Technologies, LP
50 Industrial Park Road
Lewistown, PA 17044
Telephone: (717) 242-0327
(717) 242-0331
Telefax: (717) 242-2606
The CL 5 is manufactured according to state-of-the-art
methods using high-quality components. In-process
testing and a quality management system certified to
ISO 9001 ensure optimum quality of instrument
conformance. Nevertheless should you experience a
problem or require technical assistance, visit
the product service page accessible from
www.GEInspectionTechnologies.com to locate your local
GE Inspection Technologies representative, or contact
one of the following addresses:
Germany
GE Inspection Technologies, GmbH
Service-Center
Robert-Bosch-StraBe 3
D-50354 Huerth
or:
Postfach 1363
D-50330 Huerth
Telephone +49 (0) 22 33 - 601 111
Fax +49 (0) 22 33 - 601 402
CL 5 Issue 01, 04/05 9-5
Manufacturer/Service Addresses Appendix
9.4 Manufacturer/Service
Addresses
The CL 5 is manufactured by:
GE Inspection Technologies, LP
50 Industrial Park Road
Lewistown, PA 17044
Telephone: (717) 242-0327
(717) 242-0331
Telefax: (717) 242-2606
The CL 5 is manufactured according to state-of-the-art
methods using high-quality components. In-process
testing and a quality management system certified to
ISO 9001 ensure optimum quality of instrument
conformance. Nevertheless should you experience a
problem or require technical assistance, visit
the product service page accessible from
www.GEInspectionTechnologies.com to locate your local
GE Inspection Technologies representative, or contact
one of the following addresses:
Germany
GE Inspection Technologies, GmbH
Service-Center
Robert-Bosch-StraBe 3
D-50354 Huerth
or:
Postfach 1363
D-50330 Huerth
Telephone +49 (0) 22 33 - 601 111
Fax +49 (0) 22 33 - 601 402