To Next PageTo Next PageWhat to do if GE Measuring Instruments memory is full and ECG cannot be saved?
If you encounter a 'Memory is full. This ECG cannot be saved' message on your GE Measuring Instruments, it means the device's storage capacity is completely full. To resolve this, transmit patient reports to the configured destinations and then delete these transmitted reports from the Files list. This will create additional storage space on your device.
What to do if GE MAC VU360 memory is full and new ECGs cannot be saved?
If your GE Measuring Instruments displays 'Memory is full. New ECGs cannot be saved,' it indicates that the device's storage is at its maximum capacity. To fix this, transmit patient reports to the designated destinations and then proceed to delete the transmitted reports from the Files list. This action will free up storage space, allowing you to save new ECGs.
What to do if GE MAC VU360 Measuring Instruments memory is full?
If your GE Measuring Instruments shows a 'Memory is full' message, this indicates that the device storage capacity is between 99% and 100%. To free up space, transmit patient reports to the configured destinations, and then delete the transmitted reports from the Files list.
Why does my GE MAC VU360 say 'Battery error. Attach power cord. Contact Service'?
If your GE Measuring Instruments displays a 'Battery error. Attach power cord. Contact Service' message, it could be due to a power sensor failure or a battery capacity sensor failure. Replace the battery. If the error persists after replacing the battery, contact your GE Healthcare Service Support representative.
General| Device Type | Electrocardiograph |
|---|---|
| Power | 100-240 V AC, 50/60 Hz |
| Battery Type | Lithium-ion |
| Connectivity | USB |
| Data Storage | Internal memory, USB drive |
| Sampling Rate | 1000 samples per second |
| Battery Life | Up to 4 hours |
Identifies and describes the physical components and layout of the device.
Details the function of each key on the device's keyboard for user input.
Explains the primary screen for acquiring ECG data and its elements.
Outlines the various options available in the user menu for device configuration and operation.
Describes battery, network, and power LED indicators for device status.
Provides instructions on adjusting the display brightness level for optimal viewing.
Instructions for powering the device on, off, and putting it into standby mode.
Covers the different modes of user authentication supported by the device.
Details the process for users to access and exit the device using credentials.
Guides users on changing passwords, activating privacy mode, and locking the device.
Explains standby mode and the procedure for performing a system reset.
Describes the screen used to enter and manage patient demographic data for ECG tests.
Outlines the procedure to initiate an ECG test for a new patient.
Details methods for entering patient data via barcode or keyboard.
Explains how to retrieve patient demographic data from external systems using ADT queries.
Introduces the Hookup Advisor tool for monitoring ECG signal quality and lead status.
Explains the different modes for acquiring ECG data (pre-acquisition, post-acquisition).
Provides steps for manually initiating an ECG recording session.
Guides users on accepting, rejecting, and reviewing ECG patient reports.
Covers updating, sorting, and filtering the list of patient orders.
Details how to associate orders with patient tests and manage their status.
Lists common system messages, their causes, and solutions for device issues.
Details error messages encountered during ECG data acquisition and their remedies.
Provides troubleshooting for printer malfunctions and report transmission failures.
Explains troubleshooting for wireless, network, and USB connectivity issues.
Provides physical dimensions, weight, and design details of the device.
Details specifications for the device's screen, keypad, and printer.
Covers ECG data acquisition/processing and environmental operating conditions.
Lists safety certifications and detailed network connectivity parameters.
