GE MAC VU360 User Manual

Troubleshooting
Error Message Error Condition How to troubleshoot:
No USB device detected The USB flash drive
is not detected.
Verify that the USB flash drive is
firmly inserted into the USB port.
If the error persists, verify that
external USB storage is enabled
and the USB port is enabled.
If the error persists, use another
USB flash drive.
USB storage is full The USB storage is
full.
Remove this USB flash drive, and
insert another USB flash drive with
write permissions.
USB unknown error The USB flash drive
has an unknown
error.
Remove this USB flash drive, and
insert another USB flash drive with
write permissions.
Cannot copy to USB The report cannot
be transmitted to
the USB flash drive.
Make sure that the USB flash drive
is firmly inserted into the USB port.
Hilltop generation unsuccessful
PDF generation unsuccessful
Sapphire generation unsuccessful
The file generation
is unsuccessful.
Retry transmission.
Contact your GE Healthcare Service
Support representative if the error
persists.
Unknown error Unknown error Contact your GE Healthcare Service
Support representative if the error
persists.
Server not connected The server
connection is
unsuccessful.
DCP not found The DCP connection
is unsuccessful.
Unknown server version The server version
is unknown.
Server is not accepting the test. The server is not
accepting the
transmission.
Retry transmission.
Contact your GE Healthcare Service
Support representative if the error
persists.
No network connection The network
connection is lost.
Reconnect to the network.
2088531-370-2  MAC VU360
™
Resting ECG Analysis System 127

GE MAC VU360 Specifications

General

Device Type	Electrocardiograph
Power	100-240 V AC, 50/60 Hz
Battery Type	Lithium-ion
Connectivity	USB
Data Storage	Internal memory, USB drive
Sampling Rate	1000 samples per second
Battery Life	Up to 4 hours