GE MAC VU360 User Manual

Login and Security
2
Login and Security
Power On the ECG Device
1. Press the Power button on the keyboard for a few seconds to start the device.
The device is powered on. The Power on LED on the keyboard is green.
A notification message displays, if it is configured by the administrator.
2. Click Accept.
• If user authentication is enabled, you are prompted to log on to the device.
• If user authentication is disabled, you are automatically logged on to the
device as the Default User.
• If the user authentication mode is Technician ID, enter the Technician ID to
log on as a Default User.
Power Off the ECG Device
1. Before you stop the device, complete pending tasks, for example, acquire an ECG
and save configuration settings.
2. Do one of these steps to remove power from the ECG device:
a) From the User Menu on the screen, select Power Off.
The Power off window opens and displays a message. Select Power Off.
The device is off. The Power on LED on the keyboard is off.
b) Press the Power button on the keyboard for a few seconds:
20  MAC VU360
™
Resting ECG Analysis System 2088531-370-2

GE MAC VU360 Specifications

General

Device Type	Electrocardiograph
Power	100-240 V AC, 50/60 Hz
Battery Type	Lithium-ion
Connectivity	USB
Data Storage	Internal memory, USB drive
Sampling Rate	1000 samples per second
Battery Life	Up to 4 hours