Work with the Queue List
The Queue expanded list opens.
3. Select the Collapse icon to collapse the list and return to the Acquisition screen:
Delete Jobs from the Queue
1. From the Acquisition screen, select Queue.
The Queue collapsed list opens.
2. To display an expanded list of the Queue, select the Expand icon:
The Queue expanded list opens.
3. Select the transmission job you want to delete.
4. Select the Delete icon to delete the selected jobs:
• If the job status is In Progress, a message displays indicating that the job is in
progress and cannot be deleted.
You cannot delete the job. Wait until the transmission attempt completes and
then try again, if necessary.
• If the job is in Not Sent or Failed status, a message displays asking you to
confirm the deletion of the selected job.
5. Select Delete to confirm the deletion.
The selected jobs are deleted from the Queue. The patient report remains in the
Files list. You can transmit the patient report to a destination again, if required.
Retry Transmission of a Patient Report
Make sure that you have the privilege to transmit Rhythm, Full Disclosure, or ECG
patient reports to a configured destination.
The system automatically tries to transmit a patient report. If you need to re-transmit
the patient report before the next automatic attempt, you can use this procedure to
transmit the patient report immediately.
1. From the Acquisition screen, select Queue.
100 MAC VU360
™
Resting ECG Analysis System 2088531-370-2
To Next Page
Loading...
Need help?
General
