EasyManuals Logo

GE Coil Top User Manual

GE Coil Top
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
®
Ceramic Cooktop
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of your
glass cooktop, follow these steps:
Before using the cooktop for the first time,
clean it with CERAMA BRYTE
®
Ceramic
Cooktop Cleaner. This helps protect the
top and makes cleanup easier.
Daily use of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
Shake the cleaning cream well. Apply a
few drops of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner directly to the cooktop.
Use a paper towel or CERAMA BRYTE
®
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
Use a dry cloth or paper towel to
remove all cleaning residue. No need to
rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
Clean your cooktop after
each spill. Use CERAMA
BRYTE
®
Ceramic Cooktop
Cleaner.
Cleaning the glass cooktop. (on some models) GEAppliances.com
Burned-On Residue
Heavy, Burned-On Residue
WARNING: DAMAGE to your glass
surface may occur if you use scrub pads
other than those recommended.
Allow the cooktop to cool.
Spread a few drops of CERAMA BRYTE
®
Ceramic Cooktop Cleaner on the entire
burned residue area.
Using the included CERAMA BRYTE
®
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
If any residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
®
Ceramic Cooktop Cleaner and a paper
towel.
Allow the cooktop to cool.
Use a single-edge razor blade scraper
at approximately at 45 angle against
the glass surface and scrape the soil. It
will be necessary to apply pressure to
the razor scraper in order to remove
the residue.
After scraping with the razor scraper,
spread a few drops of Ceramic Cooktop
Cleaner on the entire burned residue
area. Use the Cleaning Pad to remove
any remaining residue.
For additional protection, after all residue
has been removed, polish the entire
surface with CERAMA BRYTE
®
Ceramic
Cooktop Cleaner and a paper towel.
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops.
The Ceramic Cooktop Scraper and
all recommended supplies are
available through our dealers or
through a Camco Parts Store.
NOTE: Do not use a dull or nicked
blade.
27

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE Coil Top and is the answer not in the manual?

GE Coil Top Specifications

General IconGeneral
BrandGE
ModelCoil Top
CategoryRanges
LanguageEnglish

Related product manuals