EasyManua.ls Logo

GE DDE7200S - Dryer Exhaust; Dryer Exterior; Lint Filter; User Maintenance Instructions

GE DDE7200S
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Maintenance Instructions
CAUTION: If yours is an electric dryer, before you have it
connected in your new residence, be sure your licensed electrician
confirms that the supply voltage matches the voltage specified on
the rating
plate.
Dryer Exterior
Wipe off any
spills
or washing
Dryer control panel and finishes
Apply these pre-treatment products
compounds. Wipe or dust with a
may be damaged by some laundry
away from the dryer. The fabric
damp cloth. Try not to strike the
pre-treatment soil and stain
may then be washed and dried
surface with sharp objects.
remover products if such products
normally. Damage to your dryer
are sprayed on or have direct
caused by pre-treatment products
contact with the dryer.
is not covered by your warranty.
Dryer Drum
Dryer Exhaust
Dryer Storage
The porcelain enamel drum
Inspect and clean the dryer
To store your dryer for a
is rust-resistant and requires
exhaust
ducting
at least once
short period of time, disconnect
no special care.
a year.
the power
supply
and clean the
lint filter.
Lint Filter
Before every dryer
use, clean the lint
filter. Put your
moistened fingers
at the corner of the
filter and wipe all
the way across to
the other corner.
%
Periodically,
w->
remove the
lint
filter and insert
--
the suction hose
from your
al~
‘)1
vacuum cleaner
into the
o~enin~.
~J
Lint Filter
Air Circulation
Do not obstruct the flow of combustion and
ventilating air.
I
11

Related product manuals