GE DDE7200S - Check the Lint Filter

Check the Lint Filter
Clean the lint filter each time the dryer is used. Always be sure the lint filter
is in
place. Don’t use the dryer without it. See Care and Cleaning section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if clothes are
sorted correctly for washing, they’re sorted correctly for drying. See the
How to Sort the Clothes section. If you do mix various types of fabrics in
your load, set the controls for the lighter-weight fabrics and remove when
dry. Reset controls for the remaining heavier fabrics.
Set the COntrO]S — Controls and features will vary from model to model
See the Suggested Fabric and Drying Selections guide.
~Dryi”g Selections. @ Cycle Selector.
Select the proper heat for your load.
Turn the Cycle Selector to the desired cycle
setting. The selector may be turned in either
Should be used with cycles indicated ●
direction.
Automatic
~ Start Knob.
Drying
Automatic
Perm. Press and
Timed
Selections
Regular cycle
Knits Cycles
cycles
Turn the Start knob to start the dryer. (Opening
the door during operation stops the dryer. To
Cottons
High Heat
● ●
restart, close the door and turn the Start knob.)
Perm. Press
Medium Heat
●
●
Fluff
No Heat
●
KnitsDelicates
Low Heat
● ●
NOTE: Drying times will vary according to the
type of heat used (Electric, Natural gas or
LP
gas), size of load, types of fabrics, wetness of
clothes, and condition of exhaust ducts.
71