GE DISPOSALL GFC320N User Manual

GE DISPOSALL GFC320N

48 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Write the model and serial

numbers here:

Model # _________________

Serial # _________________

You can find them on a label on

the bottom of the disposer.

GE is a trademark of the General Electric Company. Manufactured under trademark license.

OWNER’S MANUAL

AND INSTALLATION

INSTRUCTIONS

DISPOSALL

®

49-5903-3 12-18 GEA

ENGLISH/FRANÇAIS/

ESPAÑOL

SAFETY INFORMATION ..........3

USING THE DISPOSER

Continuous Feed Models ................5

Batch Feed Models .....................5

CARE AND CLEANING .............6

INSTALLATION INSTRUCTIONS

Preparation ...........................7

Components and Installation ............8

Installation of Sink Flange ..............8

Dishwasher Connection .................9

Attach the Discharge Elbow .............9

Connect Disposer to Sink Flange .......10

Dimensions .......................... 11

Some Typical Installations ............. 11

TROUBLESHOOTING ............12

LIMITED WARRANTY ...........15

CONSUMER SUPPORT ..........16

Food Waste Disposer

GFC320N

GFC325N

GFC520N

GFC525N

GFC530N

GFC535N

GFC720N

GFB760N

GFC1020N

Table of Contents

Questions and Answers:

A
Anna WileyAug 4, 2025
What to do if my GE DISPOSALL GFC320N doesn't start?
- K
  Kevin CollinsAug 4, 2025
  First, with the splash guard removed, check if the turntable moves freely using a broom handle. If it does, replace the splash guard and check the red reset button, located opposite the discharge elbow near the bottom of the disposer, to see if it has been tripped. Push the button in until it clicks and remains depressed. If the reset button hasn't tripped, check for shorted or broken wires connected to the disposer, and inspect the electrical power switch, fuse box, or circuit breaker. If wiring and electrical components are intact, the unit may have internal problems requiring service or replacement.
J
Jasmine WoodardAug 12, 2025
How to fix loud noises from GE DISPOSALL GFC320N?
- M
  Michele SullivanAug 12, 2025
  To address loud noises (other than those during grinding of bones and fruit pits) in your GE Garbage Disposal, remove the splash guard and use long-handled tongs to remove any foreign objects. Then, replace the splash guard.
C
Christy MccarthyAug 19, 2025
What to do if GE DISPOSALL GFC320N turntable cannot rotate?
- K
  kyle23Aug 19, 2025
  If the turntable doesn't turn freely, check for any object lodged between the turntable and the grinding ring. Dislodge the object by moving the turntable with a broom handle and then remove it. If no foreign object is present, there may be internal problems.
C
Crystal MorenoAug 27, 2025
Why is my GE DISPOSALL GFC320N leaking?
- S
  Sherry HallAug 27, 2025
  If the leak is at the top, it could be due to improper seating of the sink flange (gasket choice, putty, or tightening), the support ring not being tightened properly, or a defective cushion mount. If the leak is at the discharge elbow, it may be caused by improper tightening of the elbow flange screws.

GE DISPOSALL GFC320N Specifications

General

Feed Type	Continuous
Grinding Chamber Material	Stainless Steel
Weight	10.5 lbs
Sound Insulation	Yes
Motor Speed	1725 RPM
Grind Stages	1
Anti-Jamming Feature	Yes
Mounting Hardware Included	Yes
Warranty	2 years

Summary

Important Safety Information

Safety Precautions

Basic safety precautions to follow when using electrical appliances to minimize risks.

Connecting Electricity

Instructions for connecting the disposer to electrical power, emphasizing grounding.

Using the Disposer

Continuous Feed Models

Instructions for using continuous feed model food waste disposers.

Batch Feed Models

Instructions for using batch feed model food waste disposers.

Installation Instructions

Before You Begin

Preparation

Steps to prepare the installation site and remove old components.

Components and Installation

Details of disposer components and step-by-step installation procedures.

Dishwasher Connection

Attach the Discharge Elbow

Connect Disposer to Sink Flange

Procedure for attaching and securing the disposer to the sink flange assembly.

Troubleshooting Tips

Related product manuals

Preview: GE Disposall GFC320 Series

GE Disposall GFC320 Series

Preview: GE Disposall GFC325V

GE Disposall GFC325V

GE DISPOSALL GFC325N

GE Disposall GFC300F Series

Preview: GE Disposall GFC530V

GE Disposall GFC530V

Preview: GE Disposall GFC535V

GE Disposall GFC535V

GE DISPOSALL GFC520N

GE DISPOSALL GFC525N

GE DISPOSALL GFC530N

GE DISPOSALL GFC1020N

Preview: GE DISPOSALL GREEN05

GE DISPOSALL GREEN05

Preview: GFC530F - DirectWire 1/2 HP Continuous Feed Disposer

GFC530F - DirectWire 1/2 HP Continuous Feed Disposer