EasyManua.ls Logo

GE E1410SW - Page 84

GE E1410SW
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
80 8181
Problem Possible causes Solution
Images cannot print from the
connected printer.
The camera is not connected to the
printer correctly.
The printer is not PictBridge
compatible.
T
he printer is out of paper or out of ink.
The paper is jammed.
Check the connection between the camera and
printer.
Use a PictBridge compatible printer.
Load some paper in the printer.
Replace the ink cartridge in the printer.
Remove the jammed paper.
Write to memory card slowly When movie abov
e HD is recorded
into the memory card below Class
4, perhaps it is too slow to continue
recording.
Please select HCSD or shoot after formatting
this card.
Cannot write to the memory card Memory car
d is in write-protection
state.
When shooting or r
ecording, write-
protection interruption phenomenon
in the memory card (such as due to
too slow storage etc.) leads that you
can not continue to shoot or record. .
Please r
eplace a memory card.
Please shoot again.
Too many movies to process The number of pictur
es or binders
in the memory card exceeded the
specications, so the playback of
data folder can not be displayed.
Delete needless les.
T
ransfer the les in the memory card to other
area.

Table of Contents