18 1918 19
Your camera is equipped with two types of zoom: optical zoom
and digital zoom. Use zoom control at the top of the camera to
zoom in or out on your subject while taking pictures.
Zoom indicator (See
“Digital Zoom“ on
page 47)
When the optical factor reaches its maximum value, it stops
momentarily. Release and push the zoom wheel again, and the
optical zoom will switch over to digital zoom automatically.
After the adjustment, the zoom indication scale hides
immediately, and the current zoom status is indicated by the
following symbol .
Shooting in Auto Mode
Auto mode is the easiest mode to take photos. While
operating in this mode, the camera automatically optimizes
your photos for best results.
To start shooting, do the following:
1. Press
Power to turn the camera on.
2. In the Mode menu, select the Auto mode ( ).
3. Compose your picture on the LCD screen and press the
Shutter button halfway to focus on the subject.
4. The focus frame in the middle of the LCD will turn to green
when the subject is properly in focus.
5. Press Shutter fully to capture the image.
Using the Zoom Function
BASIC OPERATION
To Next Page
Loading...
Need help?
General
