The electrode of the spark igniter is
exposed when the burner head is
removed. When one burner is turned
to LITE, all the burners spark. Do not
attempt to disassemble or clean
around any burner while another
burner is on. An electric shock may
result, which could cause you to
knock over hot cookware.
25
Grate
Burner head
Burner cap
Cooktop
Sealed Burner Assemblies (on some models)
Turn all controls OFF before removing the
burner parts and drip pans (if so equipped).
The burner grates, caps, burner heads and
drip pans (if so equipped) can be lifted off,
making them easy to clean.
CAUTION: Do not operate the
cooktop without all burner parts, drip pans (if so
equipped) and grates in place.
NOTE: Do not lift the cooktop. Lifting the cooktop
on sealed burner models can lead to damage and
improper operation of the range.
ge.com
Drip pan (if
so equipped)
Electrode
Electrode
Consumer SupportInstallation Instructions Troubleshooting TipsOperating Instructions
Safety Instructions
To Next Page
Loading...
Need help?
General
