Need help?Do you have a question about the GE EP 1000T and is the answer not in the manual?
Instructions for safe installation of the UPS, covering environmental conditions and electrical connections for different models.
Information on maintenance, servicing, and identifying faults, emphasizing qualified personnel and electrical hazards.
Detailed explanation of the function for each LED indicator (AC INPUT, BATTERY, BYPASS, UPS ON, ALARM).
Explanation of LEDs indicating load and battery capacity for EP700/1000/2000/3000 and EP6000 models.
Procedures for connecting the UPS input power, output sockets, and computer load.
Steps for turning on the UPS with or without utility power, including self-test procedures.
Procedures for turning off the UPS in Inverter mode or Battery mode.
Steps for connecting an external battery pack for extended backup time.
Detailed input, output, and battery electrical specifications for EP700-3000 models.
General specifications including power rating, frequency, voltage, current, dimensions, and weight for EP6000 models.
Detailed input and output electrical performance, including voltage regulation, frequency tolerance, distortion, and overload capacity.
Notes and procedures for installing input/output power cords and protective earth ground for the EP6000.
Procedure for connecting external battery packs to the long backup time EP6000 UPS.
Steps to turn on the EP6000 UPS when utility power is available.
Steps to turn on the EP6000 UPS when utility power is not available.
A table listing common EP6000 UPS problems, their possible causes, and solutions.
Important safety precautions for disposing of and replacing UPS batteries, highlighting hazards.
Table mapping operating states to LED displays and alarm warnings for the EP6000 model.
To Next Page
General