To Next PageTo Next Page
Need help?Do you have a question about the GE Digital Energy SG Series and is the answer not in the manual?
General safety precautions and warnings for UPS operation and handling.
Guidelines and warnings for installing the UPS and related components.
Recommendations for storing the UPS and battery safely.
Safety precautions and handling instructions for batteries, including installation and connection.
Diagrams and descriptions of the physical layout for SG Series 10 and 20 kVA models.
Diagrams and descriptions of the physical layout for SG Series 30 and 40 kVA models.
Instructions and precautions for moving and transporting the UPS unit.
Specifications for UPS dimensions and weight, including variations with/without battery.
Procedures for inspecting the UPS upon delivery and reporting any damages.
Guidelines for storing the UPS and batteries, including temperature and recharge recommendations.
Guidelines for selecting an appropriate installation site for the UPS, considering environmental factors and required clearances.
Information on UPS openings for input and output cable connections.
Instructions for positioning and securing the UPS cabinet, including use of leveling feet.
Requirements for selecting a suitable location for UPS batteries, considering ventilation and temperature.
Procedures for connecting the UPS to the utility power source, including common and separate inputs.
Guidelines for sizing circuit breakers, fuses, and cables for UPS input and output connections.
Recommendations for selecting DC fuses or circuit breakers and sizing battery cables.
Specifications for wiring requirements and maximum acceptable cable diameters.
General guidelines for connecting input/output and DC power cables, including torque specifications.
Instructions on how to access input, output, and battery connection terminals for SG Series 10 & 20 kVA.
Instructions on how to access input, output, and battery connection terminals for SG Series 30 & 40 kVA.
Detailed wiring diagram and procedure for common input utility connection for SG Series 10 & 20 kVA.
Detailed wiring diagram and procedure for common input utility connection for SG Series 30 & 40 kVA.
Wiring for separate input utility connection for SG Series 10 & 20 kVA, including link removal.
Wiring for separate input utility connection for SG Series 30 & 40 kVA, including link removal.
Procedure for connecting external batteries to SG Series 10 & 20 kVA UPS.
Procedure for connecting external batteries to SG Series 30 & 40 kVA UPS.
Configuration steps and warnings for operating the SG Series UPS as a frequency converter.
Instructions for locating and connecting control bus cables on the electronic module.
Description of customer interface ports, programmable relays, and input contacts.
Details on the RS-232 serial port for remote system management using JUMP software.
Information on voltage-free relay contacts for UPS alarms and operation status.
Using external contacts to activate UPS functions like emergency generator input.
Input for generator status signal, impacting synchronization and battery recharge.
Connecting an external bypass switch to control UPS operation.
Details on the 24 VDC Auxiliary Power Supply connection.
Connecting an external emergency stop switch for immediate UPS shutdown.
A form for recording maintenance, component replacements, and abnormal situations.
General