Specifications
Measurement Principle
This product is developed according to the BIA (Bioelectrical lmpedance Analysis)
method. A fine dual-frequency AC current will go through human body standing on
the conductive electrodes of the fat scale to measure human body's bio-resistance.
Since body fat hardly conducts electricity, while body components such as muscle
and water are easily conductive, the ratio of each component in the human body
can be calculated from the human body bioresistance.
Display Description
Product Name: Smart Body Fat Scale
Model: Fit Plus
Dimensions: 11″ × 11″ × 0.98″ / 280 × 280 × 25 mm
Weight: 2.9 lb / 1.3 kg
Weighing Range: 0.4 - 396 lb / 0.2 - 180 kg
Power: 200mAh Polymer lithium battery
Rated Input: 5V 200mA
Overloaded Calibrating Fully Charged
No Display
Low Power
Unstable Measurement Overtime Weighing Calibration Failure Auto off
User Manual
EN
Need help?
To Next Page
General
